Radio Shack R52S Guia do Utilizador

User GuideMMX 32 VGA MTPMatrix Switchers3x2 VGA and Audio Matrix Switcher with MTP Twisted Pair Output68-2268-01 Rev. A06 12

MMX 32 VGA MTP • Installation and Operation 5Furniture MountingUse the optional MBU 125 mounting kit (part number 70-077-01) to mount the MMX as foll

MMX 32 VGA MTP • Installation and Operation 6Inputsa Video and audio inputs — Connect computer video sources to these female 15-pin HD connectors. C

MMX 32 VGA MTP • Installation and Operation 7Pre-Peaking and Sync Selectionf Pre-peaking selection — To select the correct peaking option to compens

MMX 32 VGA MTP • Installation and Operation 8Power Connectioni Power connector — An external 12 VDC power supply is included with the unit. Plug it

MMX 32 VGA MTP • Installation and Operation 9TP Cable TerminationNOTE: RJ-45 termination must comply with the TIA/EIA T 568A or TIA/EIA T 568B wirin

MMX 32 VGA MTP • Installation and Operation 10Front Panel Features and OperationMMX 32 VGA MTPOUTPUT 1213OUTPUT 221312Figure 10. Front Panel Features

MMX 32 VGA MTP • Installation and Operation 11System ResetTo clear all user settings and reset the switcher to its factory settings, press and hold t

MMX 32 VGA MTP • Remote Control 12Remote ControlThis section covers topics relating remote control operation, including:• Output Control• RS-232 Con

MMX 32 VGA MTP • Remote Control 13Simple Instruction Set ControlHost-to-switcher instructionsThe switcher accepts SIS commands through the remote con

MMX 32 VGA MTP • Remote Control 14Symbol definitions•= Space]= Carriage return/line feed}= Carriage return (no line feed)E= “Escape key” or W|= Pipe

Safety Instructions • EnglishThis symbol is intended to alert the user of important operating and mainte-nance (servicing) instructions in the literat

MMX 32 VGA MTP • Remote Control 15Command ASCII Command (host to switcher)Response(switcher to host)Additional descriptionFront panel security lock o

MMX 32 VGA MTP • Remote Control 16Loading firmware using an SIS commandFirmware can be uploaded two ways:1. Using the Universal Switcher Control Pro

MMX 32 VGA MTP • Remote Control 17NOTE: Ensure that the firmware upgrade is for the MMX Series switcher. Valid firmware files must have the file ext

MMX 32 VGA MTP • Remote Control 18Windows®-Based Control ProgramThe Universal Switcher Control Program is compatible with Windows 98 and later, and p

MMX 32 VGA MTP • Remote Control 194. Follow the on-screen instructions. The program prompts you to choose to either “run” or “save” the software. Cl

MMX 32 VGA MTP • Remote Control 20Resetting the switcherThe Unit Reset window allows you to clear all user settings and reset the switcher to its fac

MMX 32 VGA MTP • Remote Control 218. Click Browse in the New Firmware File field. Locate the update file you downloaded from the Web site and click

MMX 32 VGA MTP • Remote Control 22Connecting an MMX 32 AAP or MMX 32 MAAP Control PanelEach Extron MMX 32 AAP and MMX 32 MAAP contact closure remote

FCC Class A NoticeThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rule

Conventions Used in this GuideNotifications the following are used:WARNING: A warning indicates a situation that has the potential to result in death

vTechnical Publications Standards and Styles • IntroductionContentsIntroduction ... 1A

MMX 32 VGA MTP • Introduction 1IntroductionThis section provides information on the following topics:• About this Manual• About the MMX 32 VGA MTP•

MMX 32 VGA MTP • Introduction 2Features• Inputs — The MMX VGA MTP has three female 15-pin HD input connectors, each with a 3.5 mm stereo jack.• Out

MMX 32 VGA MTP • Installation and Operation 3Installation and OperationThis section covers the following topics:• Mounting the MMX 32 VGA MTP• Rear

MMX 32 VGA MTP • Installation and Operation 4Rack MountingFor optional rack mounting, mount the switcher on any of the following rack shelves:• RSU