Radio Shack PRO-136 Manual do Utilizador descarregar pdf (Página 22)

Advanced Programming

You can clone your scanner by transferring the programmed data to or from

another PRO-136 scanner using a connecting cable. You can also upload or

download programmed data from a PC through wired programming.

Cloning Your Scanner

You can clone all the frequencies in

your PRO-136 to another PRO-136 or

PRO-135 using an optional interface

cable with 1/8-inch phone plugs on

both ends.

1. Make sure the scanners are turned

off and then plug the cable into

each scanner’s PC/IF jack.

2. Turn on both scanners. WirEd and PGM appear.

PGM

3. Press T or S on the scanner from which you want to send frequencies.

This is the “master unit.” The receiving scanner is the “slave unit.”

4. Press ENT/PROGRAM on the master unit to send the data. SEnd and the

transfer progress are displayed in the master unit.

BANK0 1 2 3 PGM

PC/IF Jack

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Sem comentários

Radio Shack PRO-136 Manual do Utilizador Página 22