Radio Shack Easy Remote Especificações descarregar pdf (Página 7)

To control specific lights and appliances directly from your Command

Console, press the button on the console which corresponds to the number

of the module you want to control (1/5, 2/6, 3/7, 4/8). Then use the

function keys on your Command Console to control the device.

6. To brighten or dim lights connected to lamp and appliance modules,

press the digit key for the module you want to control. Then press 1 and

hold Brt or Dim on the remote control (or BRIGHT or DIM on your Command

Console). Release the key when the desired brightness is reached.

Note:

You must select the individual light to brighten or dim even if you used

All Lts On or ALL UNITS ON to turn on all the lights at the same time.

CHANNEL SCAN:

Channel Scan lets you scan through available channels on your TV, VCR, or

cable converter, stopping at each for about 3 seconds.

1. Press the device key (TV, VCR, or CBL).

2. Aim the 6-in-1 Remote Control at your device and press SCAN. The 6-in-

1 scans through the available channels.

Note:

The 6-in-1 must be pointed at the device the entire time you are using

the Channel Scan feature.

3. To stop scanning, simply press any key (other than SCAN) on the remote

control.

FAVORITE CHANNEL SCAN:

The Favorite Channel Scan feature lets you set up your 6-in-1 Remote

Control to scan through a list of up to 10 pre-selected channels,

stopping at each for about 3 seconds.

Setting Favorite Channel Scan:

Note:

Favorite Channel Scan can only be set up for one device. Once the

Favorite Channel Scan feature has been set up for one particular device,

it will not work for any other device, until you clear Favorite Channel

Scan.

1 2 3 4 5 6 7 8 9 10 11 12 ... 45 46

Sem comentários

Radio Shack Easy Remote Especificações Página 7